Briggs & Stratton PowerProtect+ 22kW
A 22 kW home standby generator, rated the same on propane and natural gas, with a Vanguard engine and a 7-year warranty. Briggs & Stratton rates it at 66 dB(A) in normal operation.
- Running watts
- 22,000 W
- Fuel
- propane, natural gas
- Best for
- Backing up most of a larger home automatically, with an automatic transfer switch.
- Not for
- DIY installation or renters. It's a permanent installation by a dealer.
Paid link: we may earn a commission if you buy through it, at no extra cost to you.
Specifications
| Running watts | 22,000 W |
|---|---|
| Fuel | propane, natural gas |
| Noise | 66 dB(A) |
|---|---|
| Weight | 490 lb |
| Length | 46 in |
| Width | 27 in |
| Height | 28 in |
| Standard warranty | 7 years |
|---|
Checked 29 October 2026. Sources: energy.briggsandstratton.com.
Common questions about the Briggs & Stratton PowerProtect+ 22kW
What can the Briggs & Stratton PowerProtect+ 22kW run?
Its 22,000 running watts cover any common household appliance. Whether it can run the whole house at once depends on your biggest loads, such as central air, electric heat and a well pump, so installers size a standby generator with a load calculation.
How loud is the Briggs & Stratton PowerProtect+ 22kW?
Briggs & Stratton rates it at 66 dB(A) (the measuring distance isn’t stated, so compare with care).
What fuel does the Briggs & Stratton PowerProtect+ 22kW use?
Briggs & Stratton lists it for propane or natural gas. On natural gas it runs from your home’s gas line, so there’s no refuelling during an outage.
Can I install the Briggs & Stratton PowerProtect+ 22kW myself?
No. A home standby generator is wired into your electrical panel through a transfer switch and connected to natural gas or propane, so it needs a licensed electrician and usually a gas fitter. Most areas also require a permit and inspection.