Briggs & Stratton PowerProtect 13kW
A permanently installed home standby generator rated at 13 kW on propane (11.5 kW on natural gas), with a Vanguard commercial-grade engine and a 7-year comprehensive warranty.
- Running watts
- 13,000 W
- Fuel
- propane, natural gas
- Best for
- Automatic backup for a home's essential circuits, installed with a transfer switch.
- Not for
- DIY installation. It needs a dealer, a transfer switch and a fuel hookup.
Paid link: we may earn a commission if you buy through it, at no extra cost to you.
Specifications
| Running watts | 13,000 W |
|---|---|
| Fuel | propane, natural gas |
| Noise | 69 dB(A) |
|---|---|
| Weight | 315 lb |
| Length | 28.5 in |
| Width | 25.5 in |
| Height | 37.6 in |
| Standard warranty | 7 years |
|---|
Checked 29 October 2026. Sources: energy.briggsandstratton.com.
Common questions about the Briggs & Stratton PowerProtect 13kW
What can the Briggs & Stratton PowerProtect 13kW run?
Its 13,000 running watts cover any common household appliance. Whether it can run the whole house at once depends on your biggest loads, such as central air, electric heat and a well pump, so installers size a standby generator with a load calculation.
How loud is the Briggs & Stratton PowerProtect 13kW?
Briggs & Stratton rates it at 69 dB(A) (the measuring distance isn’t stated, so compare with care).
What fuel does the Briggs & Stratton PowerProtect 13kW use?
Briggs & Stratton lists it for propane or natural gas. On natural gas it runs from your home’s gas line, so there’s no refuelling during an outage.
Can I install the Briggs & Stratton PowerProtect 13kW myself?
No. A home standby generator is wired into your electrical panel through a transfer switch and connected to natural gas or propane, so it needs a licensed electrician and usually a gas fitter. Most areas also require a permit and inspection.